* User Info

Welcome, Guest. Please login or register.

* Support us

Is the ASW15 portal useful to you?
Consider a (small) donation to keep the project running:

Thanks to our sponsors:
christian larsen

* Recent Posts

Just became joint owner of a balsa ASW 15 by Henry Swayze
[19 April 2018, 01:52]

whiz wheel/Final glide calculator by Adam Howell
[07 February 2018, 03:38]

Competition preparation and sealing by TheFabulousX1
[21 January 2018, 17:06]

Replacement tail wheel by daveprice
[05 January 2018, 20:40]

Another new member by Andrew Logan
[05 November 2017, 18:57]

* Gallery


Views: 1051
Posted by: Pieter Hendrickx
in: ASW-15A OO-ZMB
OO-ZMB Cockpit

Views: 1699
Posted by: Pieter Hendrickx
in: ASW-15A OO-ZMB


Author Topic: Competition preparation and sealing  (Read 868 times)

Offline jcfx11

  • Bronze Member
  • *
  • Posts: 1
Competition preparation and sealing
« on: 14 November 2017, 09:23 »

I'm looking into sealing a 15b better, eg, it has a noisy canopy, a cg hook and an aerotow hook, poorly fitting U/C doors, I might consider mylar seals on the ailerons and the rudder and so on.

Has anyone looked at or done similar work and could you give me info on how you tackled the work.



Offline TheFabulousX1

  • Bronze Member
  • *
  • Posts: 2
  • Registration number: OE-0862
  • Call sign: X1
  • Stationned at airfield: LOXT
Re: Competition preparation and sealing
« Reply #1 on: 21 January 2018, 17:06 »
Hi John,

I have mylar seals on ailerons and rudder with teflon sealing below it; standard fabric band (outer slots) and mylar (inner slot) at the gear doors.
In my opinion, tight sealing and mylar on the ailerons is an absolute "must have" on composite gliders, it defintely pays. Mylar is important preventing cross-direction airflows within the small gap between wing and aileron.

Please have a look here:
(scroll down for installation instructions)

For the cg hook I would recommend a flexible sealing made of kite-cloth on the inside. (I have only aerotow-hook, which I sealed by a flexible rubber plate with a slot in the middle on the outside; inside sealing made of kite-fabric is under construction ;-)

Best regards
« Last Edit: 21 January 2018, 21:28 by TheFabulousX1 »