collapse

* User Info

 
 
Welcome, Guest. Please login or register.

* Bookmark/Share us

| More

* Support us

Is the ASW15 portal useful to you?
Consider a (small) donation to keep the project running:


Thanks to our sponsors:
christian larsen
You!?

* Recent Posts

* Gallery

Advertisement


« previous next »
Pages: [1]

Author Topic: AD 84-20-01 elevator bellcrank  (Read 398 times)

Offline jg

  • Silver Member
  • **
  • Posts: 6
AD 84-20-01 elevator bellcrank
« on: 13 December 2011, 01:33 »
Can someone tell me what the mod to the elevator bellcrank looks like.  I am doing an annual on a 15B.  The logbook indicates that the mod was accomplished years ago, however IA's continue to sign off as accomplishing the reinspect. I would like to put the reinspect to bed, if infact the mod has been done.

JG
Logged

Offline jg

  • Silver Member
  • **
  • Posts: 6
Re: AD 84-20-01 elevator bellcrank
« Reply #1 on: 20 December 2011, 21:06 »
Here is a drawing of the crank showing the modification by adding a long piece of tubing (item #1 in the drawing) to the aft side of the actuating crank tube.  The other two variants I and II are original tubes and they do not constitute the mod to the crank.  The tech not 22 explains all including the structural work that accompanies this mod.

Joe
« Last Edit: 20 December 2011, 21:08 by jg »
Logged
Pages: [1]
« previous next »
 
person