The Un-Official Schleichers ASW 15 (B) Glider Information Portal - Re:Tailplane pins

Welcome to the un-official Schleichers ASW-15 (B) forum

ASW-15 Forum

home | post reply | threaded view |

| help

Boardwalk :: Forum List

ASW15 Forum

ASW15 small talk, questions and answers

Gunter Krüger
User

Junior Boarder

Posts: 6

Tailplane pins - 2008/02/24 13:46 Hi

I was busy doing my airworthiness inspection on the 15 this weekend, and when checking the elevater pins I found that two of them were actually loose and were freely turnable. Has anybody else had this problem with the the pins in the elevator?

I wrote the Schleicher for a repair scheduel on have to get to the pins and tighten them. So i'll see what happens.

Cheers

Post edited by: Gunter, at: 2008/02/24 13:47

The administrator has disabled public write access.

Johan van Ravenzwaaij
Admin

Admin

Posts: 166

Re:Tailplane pins - 2008/03/04 23:50 Strange, In my plane the nuts are painted with the metal. So, for to get loose the paint has to get cracked first.

The administrator has disabled public write access.

damien dyer
User

Fresh Boarder

Posts: 3

Re:Tailplane pins - 2008/03/07 20:43 Is it the pins that are loss in the tail plane or are they loss in the tailplane drive? if the latter then you can get oversize pins from ASW this is what we have done on our 15.
hope this helps

The administrator has disabled public write access.

Gunter Krüger
User

Junior Boarder

Posts: 6

Re:Tailplane pins - 2008/04/21 03:24 hey

I got the pins tightened. As it turns out the previous owners replaced the pins with over sized ones, but didn't cut the thread on the back of the pin far enough, so it couldn't be tightened far enough. All is good now though.

The administrator has disabled public write access.

Boardwalk :: Forum List ASW15 Forum ASW15 small talk, questions and answers

Joomlaboard Forum Component 1.1.2 Stable
Two Shoes M-Factory