Johan van Ravenzwaaij
Admin
Admin
| Posts: 186 |  |
|
Re:ASW15 Transponder TM - 2008/03/17 20:26
We have finished the installation of the transponder for almost 90% this weekend.
It was quite tricky to find room in the instrument panel for the transponder. We had only to cut away a small piece of the panel. Then we glued in with epoxy the antenna bracked. Don't forget to mark the place with a pen before you glue it together; it's very hard to see where to place the bracked, when you have to stretch your arm through the hole in the back.
Next, rigging the coax antenna cable through side of the cockpit. This went fairly easy going from the back to the front. Solded the coax connectors on both sides.
The only thing to do is to fit the actual antenna to the bracket and connect the transponder to the powerbox.
|
Forum 
